![]() |
![]() |
ELIMINATOR Oil Remover Product Description ELIMINATOR is a water solution of specially formulated emulsifiers and surfactants for use to remove oil and grease from concrete. ELIMINATOR is user-friendly and is easily applied by low pressure pump-up sprayer or by pouring onto the oily surface. No special high-pressure equipment is necessary.
New ! Concrete Remediation Products
Concrete Remediation Solutions ProductsConcrete Remediation Solutions' revolutionary family of products clean concrete while capturing hazardous wastes and cleaning materials for USA EPA approved disposal in landfills or incineration. Visit Concrete Remediation Solutions for information.
ELIMINATOR OIL REMOVER is recommended for use on:
- Accumulated automotive oil and grease drippings on drives and parking lots
- Automotive service areas
- Marine structures such as docks and piers
- Machine shops and other manufacturing areas
- Maintenance barns
ELIMINATOR Product Data
Especially formulated to meet the ASTM C 928 requirements for Packaged, Dry, Very Rapid Hardening Cementitious Materials for Concrete Repair.
PROPERTIES: Appearance Pale Blue Liquid Specific Gravity 1.03 Odor Slight Citrus Solvent Water VOC None Flammability None Storage Life Indefinate in original unopened container UV Resistance Not affected PH 11.5 to 12
ELIMINATOR Data
- Limitations
Do not use below 35°F.
Do not let dry on glass or aluminum - may cause etching and permanent damage.
- Application
Saturate surfaces with ELIMINATOR by spraying with low pressure sprayer or pouring onto the area to be cleaned. Apply ELIMINATOR as it is supplied - do not dilute. Apply at about 200 sq. ft. per gallon. Scrub the oily area with a stiff bristle broom to emulsify oil. Rinse away the residue with water. Repeat application as necessary.
SAFETY and HANDLING
- Safe Work Practice
Safe work practice will include the use of chemical goggles or face shields, rubber gloves and full length clothing.
- Eye and Skin Contact
The liquid contains alkalii and will cause buring and irritation to the eyes and skin. If material contact is made, wash immediately and thoroughly with clean, potable water. If irritation persists, seek medical attention.
- Ingestion
Gastrointestinal irritation may result. Do not induce vomiting. Take large amounts of water. Seek medical attention.
- Disposal
Not a hazardous waste. Wash away with water.
For detailed information on ELIMINATOR email lsepoxies@lsepoxies.com.
For quantity pricing and estimation details for your job, email us at lsepoxies@lsepoxies.com.
| COMMERCIAL OR INDUSTRIAL INQUIRIES ONLY PLEASE |
| For information email LONE STAR EPOXIES at: |
| ls@lsepoxies.com |
Lone Star Epoxies |
![]() |
P.O. Box 121 Rowlett, Texas 75030-0121 |
| Fischl Enterprises, Inc. dba Lone Star Expoxies | ||
- Decorative Flooring
- Industrial Flooring
- Chemical Resistant Coatings
- Abrasive Surfaces
- U.S.D.A. Approved Materials
- Waterproofing Materials
© 1998-2007, Deborah Fugitt, City Seahorse, Inc. All rights reserved. No one, for any reason, is permitted to copy the photos, graphics or text on these pages without written permission from City Seahorse, Inc. and Fischl Enterprises, Inc. In the event that an infringement is discovered you will be notified and invoiced the industry standard TRIPLE FEE for unauthorized usage and/or prosecuted for Copyright Infringement in U.S. Federal Court where you will be subject to pay our court costs and attorneys' fees as well as a fine of US$150,000 statutory damages. Write the webmaster for permission or information. |